Yup, got an axle, to swap with my current Glanza axle so I can get rid of the god forsaken rattling on the pillowball axle arm bushes :)
And here's a low quality clip to amuse you too (notice the smoke billowing out on the first run!)
Well, a couple of updates to keep me going - I recently received a piece of a puzzle that was missing from my life for over 2 years of searching...
Can you guess what it is yet?
Yes, I've finally gotten my hands on a Blitz K1-200V turbocharger!! A crap one, but still, I have one! It's got about a meter of shaft play and is leaking oil from every orifice, but still, I have one!! Beyond that though, it has a cracked wastegate too, but the impeller/expeller are immaculate, so that'll be sent off for a rebuild and refurb soon, and should hopefully signify a major step towards....my car not being abysmal. I also had a semi-productive weekend, though not as productive as I would've liked as I failed to receive a certain item.
I travelled down to Bournemouth to join a Dyno Day at Triton, and pop my dyno cherry, and have a laugh at the state of the car. And it was amusing, the ensuing smokescreen dropped the faces of the operators, and stank out the warehouse.
The car produced a paltry 126.6bhp, not that I really care for figures, but what is interesting to note is that the power was produced from a CT9 that is obviously worse for wear, and the boost spiked to 6psi and dropped to 3psi by the redline, so there was barely any boost there! Here are the resulting graph:
This has given me a good starting point now, and by next time I will have sorted out a variety of the issues the car is afflicted with, and get one step towards having it running....well!
No real update, other than a couple of weeks ago the boost issue was resolved by the watchful eye of sexy Rick, he just pulled out the screw on the bleed valve i have running off of the Actuator, and its sorted it out.
Car is still a pile though. Hopefully will have updates shortly
Well, was hoping to have a GOOD weekend this one passed, as I hoped to achieve quite a bit, and I kinda did! Spent 3 days swapping turbos (I took lots of breaks and it literally took me half a day to slip the turbo/downpipe back on the car), also painted said turbo pink with some leftover paint I had, heat-wrapped the exhaust section just aft of the downpipe as I figured it being that close to the sump and gearbox would be doing nothing for its thermal efficiency (ooh, big words), and did a service comprising of radiator/engine oil flushes and replacement (with Royal Purple oil too, yum), and the SARD magnetic sump plug and oil filter.
Oh, and as you can note, I got rid of the fiberglass on the manifold as..well, it annoyed the hell out of me. Was quite amusing, a lot of the fiberglass had actually melted into, well, Glass! And...not all is hunkey dorey - on a test drive, the new turbo exhibited a LOT of smoke, and I mean, James Bond evading chasing baddies kinda smoke screen. Not happy. Also, the main reason for me swapping the turbos, seems not to have rectified itself (bar the smoke) - the boost is STILL extremely slow/limited!! Aaargh.
Whilst I was at it I also took pictures of the new wheels on the car to dream a bit...I'll need more than dreaming it seems...
Modifications List
- Autobahn Oil Catch Tank (Not plumbed in)
- AutoStaff Intake Manifold Insulator Gasket
- Blitz K1-200V Turbocharger (Waiting to rebuild)
- EP91 Glanza-V 4E-FTE Engine
- Extralube ZX1 Engine Oil Friction Reducer
- Ford Focus ST FMIC w/ Hayward & Scott Piping
- Hayward & Scott 2.5" Downpipe-Back single Muffler Exhaust System
- JAM Racing 1Bar Actuator (Waiting to install)
- Magnecor KV85 Spark Plug Wires
- Ported & Polished Stock 4E-FTE Throttlebody
- Redline Water Wetter Radiator Fluid Additive
- SARD Mag II Oil Filter
- SARD Magnetic Sump Plug
- TRD 1.3kg/m Sports Radiator Cap
- TRD Duracon Oil Filler Cap
- Versa Cruise Voltage Stabiliser (removed)
- Zisco SUS321 Tubular CT9 Manifold
Drivetrain:
- Zep Racing Braided Clutch Hose
- Racing Gear Clutch Cover
- TRD CV Joints
- "TC Tuning" Solid Brass Shifter Cable Bushes
- C56 Gearbox
- Royal Purple Gear Oil (Yet to install)
Suspension:
- SPATS Cynos Front Strut Tower Brace
- Ultra Racing EP82 Fender Braces
- Whiteline Anti-Lift Kit
- Tanabe 4 Point Lower Control Arm Brace
- Silkroad RM/A8 Coilovers
- TRD Lower Control Arm Front Bushes
- TRD Front Anti-Roll Bar
- TRD Front Anti-Roll Bar Mount Bushes
- Cusco Hyper Metal Rear Axle Arm Bushes
- Zep Racing Engine Damper
- Zep Racing Pillowball Panhard Rod
- Zep Racing Rear Trailing Arm Brace
- Zep Racing 4 Point Floor Brace (Yet to install)
- Zep Racing 4 Point Rear Strut Tower Brace
- BYP/Energy Suspension Polyurethane Engine Mounts
- Okuyama Carbing EP91 3 Point front Strut Tower Brace (Need to Modify)
Brakes & Rolling Stock:
- Prodrive by Alcon 4 Piston WRC Brake Calipers (Yet to install)
- SW20 Rev3 Rear brake Calipers (Yet to install)
- Hawk HPS Brake Pads
- Cusco EP82 Brake Master Cylinder Stopper
- Brembo Discs (Grooved by Hi-Spec)
- Starlet GT Rear Axle Conversion
- 16" x 7" Enkei RS 3Pc. Wheels (Need Spacers)
- 205/45 R16 Yokohama S306 Tyres
Interior:
- Eastbear Elite Bucket Driver seat
- Bride Ergo Passenger Seat
- Comrade's C Short Shifter Kit
- Cruise Gear knob
- Dension DH100ix HDD-Based Headunit
- Nardi Classico 330m Leather Steering Wheel
- SARD 60mm Boost Pressure Gauge
- TRS Clubman 4-point Purple Road Harnesses
- GT-1 Motorsport 30mm Steering Wheel Spacer
Exterior:
- Philips Premium Sidelight Bulbs
- Cracked out Indicators w/ Ring Clear Indicator Bulbs
- Ultra Clear Repeaters & MHW Clear Bulbs
- Factory Optional Aero Lip Package
- R33 Skyline GTR Replica Bumper Vents
- Stebel Nautilus Twin-tone Horn
- Toyota Cynos Optional Window Wind Deflectors
Weight Reduction:
- Airbags & Airbag ECU Removed
- Boot Trim Removed
- Shock Tower Trim Removed
- A/C System Removed
- Rear Seats & Belts Removed
- Interior Carpetting & Mats Removed
- All Interior trim panels removed
- Headlining Removed
- Front Crash Bar Removed (Rear one missing!)
- Powersteering Pump, Lines & Reservoir Removed
- Sound Deadening Removed
- Foglights Removed
- Spare tyre and Jack removed
- Center Console removed
- Parcel Shelf removed
- Rear speakers removed
- Seatbelt assemblies removed
- HID System removed
- Doorcards removed
- TRD Front Anti-Roll Bar (2.4kg lighter than stock)
(Grand Total of about 135kg removed so far...)
* Official vehicle weight: 880kg
* Unofficial vehicle weight (not-verified): 871.6kg
Pending Setup Items Gathered:
- HRF 5E Connecting Rods
- HRF 5E 74mm Bore Pistons
- Cruise 264 Degree Camshafts
- Cruise-style TD05H Manifold & Downpipe
- GReddy TD05H-18G Turbocharger
- Synapse Synchronic 40mm Wastegate
- ACIS Intake Manifold
- 5E-FHE Crankshaft & Block
- OS Giken Twin Plate Clutch Kit
- HRF Intake Manifold with SR20 Throttlebody
Other Project Blogs...
Followers
About Me
- Enrico - Beddu
- I am Enrico, Italian/Mauritian, not affiliated with the Mafia/not a Dodo Bird. I have of late taken to the world of blogging - its a simple way of writing down haphazard memoirs, which I attempt to give structure to my life. It largely fails but it helps to circumvent boredom.